Hot

0.5m Short Path Length Cuvette for Spectrophotometer

Lid 0.5mm, 170uL, 2 Windows, Round Bottom, QL2HR-5, Short Path Length Cuvette for Spectrophotometers

0 out of 5

( There are no reviews yet. )

~~$79 – $236~~ $76 – $189

0.5 mm Short Path Length Cuvette. Low pair variation <0.3%, high transmission >83%, and high temperature resistance <1200℃. Stock for instant shipping!

Add to wishlist

Description
Specifications
Additional information
Reviews (0)

Description

Image Place Holder

This is a 0.5 mm short path length UV vis cuvette with a volume of 170 uL. The internal width is 10 mm. This short optical path length cuvette is selected for small volume samples or a high concentration chemical solution that cannot be easily diluted.

This cuvette is designed with 2 clear windows for use in absorption spectroscopy experiments, and two frosted sides for easy handling. This type of cuvette is not appropriate for use in fluorescence spectroscopy where it is necessary to have four polished windows. Cuvettes with four polished sides here.

The fused quartz material has a higher transmission of 83% (HTR) or 80% ( NRC). This spectrophotometer cuvette is usable in UV and visible wavelength range.

2 Clear Windows for Spectrophotometers
Fabricated from UV-vis Fused Quartz (190 nm – 2500 nm)
Standard Optical Path Length of 0.5 mm
Door to Door Shipping Duty Unpaid (DDU) Worldwide

0.5mm Short Path Length Cuvette

Part No	–	Inside Width	10 mm
Material	Quartz	Transmission	80% or 83%
Cap Type	–	Volume	170 ul
Windows	2 Windows	Inner Path	10 x 0.5 mm
Manufacturing	NRC / HTR*	Outer Size	45 x 12.5 x 3 mm
Bottom	Round	Wavelength	190 – 2500 nm
Path Length	0.5 mm	Include	Cell

*HTR: High-Temperature Resistant. Highest quality for advanced experiments. These types of cuvettes are melt and manufactured as one piece, with extraordinary resistance to high temperature (1200℃) and corrosive chemicals. Transmission is 83% over. Zero data reading variation is available on request (default <0.3%) for 2 or more pieces.

Note: These HTR cuvettes can be used with most popular organic solvents, as well as acids and bases. They are compatible with chemicals such as acetone, butanone, DMF, and concentrated hydrochloric acid.

*NRC: Non-Resistant To Chemicals. This type of cuvette is assembled with glue.

Note: Please note that these NRC cuvettes should not be used with benzene, toluene, aqua regia, ethanol, corrosive solutions, or other similar substances, as they may degrade the bonds between the pieces and cause the cuvette to leak. DO NOT rinse the cuvette with ethanol or similar solutions for cleaning.